The
unique and exclusive Gripfix system creates
on each component a precise series of indentations, which are then
used for holding the part in a vice
on the machine. Only 3mm is required for gripping thus saving material.
The system requires reduced clamping force and therefore has less
distortion, plus it can be removed from the vice and re-inserted
into the same position.
Centre
Compact are a range of centre-clamping vices which use the
Gripfix system. The vices are lightweight and compact yet offer
secure clamping
of parts up to 200mm wide.
The Quick
Point pallet
allows workholding devices like the Centre Compact vice, chucks or
fixtures to be quickly changed or indexed.
They are low
profile, provide 90° indexing and use a simple but
accurate mechanical clamping arrangement. They are available for both
lathes and machining centres.
Vario
Tec is the name for a range of special vice jaws with moveable pins.
The jaws are available for most popular makes of vice as well as
our own Vario Tec vice. The pins are easily extended or depressed
to provide various depths of grip, end stops and angles.
Clean
Tec is a clever self-furling fan for blowing away coolant and swarf
from the surface of parts after machining. On CNC machines it can
be loaded in the toolchanger and used within the programme.
Spin
Fix is a
low cost but very accurate fine boring system for holes in the range Ø4.8mm
to 21mm.
Special
Designs to clamp all types of component on vertical or horizontal
machining centres are available from our design department. The
clamping may be mechanical, hydraulic, pneumatic or vacuum
to suit the application.
Prismatic
Lang Workholding
Rationalise your manufacturing with Lang Technology. Thame are the exclusive distributor for Lang Werkzeugtechnik GnbH in the UK and Ireland