Thame - Quick Point



		Quick Point offers a quick and accurate clamping system It is.based on four wedge bolts in the pallet that engage with four grooved locating bolts screwed to the vice or fixture. Clamping and unclamping is by turning a central screw while repeatability is accurate within microns.
		The pallets may be mounted onto the machine table by four fixing bolts or by edge/corner clamps. In addition, a round version of the pallet is available so that the vice can be moved from a machining centre to a lathe or vice versa.
		The Centre Compact vices fit directly onto the pallets, but the special location bolts can be screwed onto any vice or fixture for use on the pallets.
		A plain fixture plate is available with the location bolts already fitted. In addition a vertically mounted Quick Point base and a five sided Quick Point cube is available.
		The four clamping points offer great rigidity and being in a square, allow the vice or fixture to be indexed through 90º, 180° and 270°. It has an extremely low profile at only 27mm so that the working envelope of the machine is not restricted.
		The Five Sided Cube allows up to 5 components to be mounted at once and allows access to five of the six component faces.